GE-P4001-UT

GE-P4001-UT

Product Code: GE-P4001-UT
  • icon4×10/100Base-TX Ethernet ports (PoE ports) and 1×10/100Base-TX up-link port;
  • iconSupport IEEE802.3af/at standards,Max.30W output of single port;
  • iconOne-key CCTV mode: 1~4 downlink ports can only communicate with uplink ports,extend transmission distance up to 250m(10Mbps);
  • icon6KV surge protection, 8KV ESD immunity and anti-interference;
  • iconEasy & safe installation: wall-mounting, desktop,Kensington security slot;/li>
  • iconPlug-and-play.

GE-P4001-UT

GE-P4001-UT 4 ports PoE Switch is a security surveillance Ethernet Switch which aims at Ethernet high definition surveillance and Ethernet project security system. The product fully combines the characteristics of security surveillance, provides fast packet forwarding ability and abundant backplane bandwidth, which ensures clear image and fluent transmission. Inserted static, surge protection circuit can improve product stability. The product supports one key CCTV model, can achieve VLAN, QoS priority after configuration, control the Net storm, protect the information security, prevent the viral transmission and Ethernet attack, fully satisfy the Ethernet video security surveillance system and Ethernet project needs.


Availability: In Stock
GE-P4001-UT
$0.00
Ex Tax: $0.00
Qty: + -
  Add to Wish List Add to Compare

Installation steps

Please check the following items before installation, if it is missing, please contact the dealer

  • 4 ports PoE Ethernet Switch 1pc
  • Power adaptor 1pc
  • AC power cable 1pc
  • Accessory 1set
  • User manual 1set
  • Please follow the below installation steps:
  • Please turn off the signal power and display device power before installation, installation with power will damage the transmission equipment;
  • Use network cable connect PoE IP camera and 1～4 down link ports of product respectively;
  • Use a network cable connect equipment up link port and NVR or computer;
  • Turn on the power of the equipment;
  • Check if the installation is correct, equipment is in good condition, the connection is stable, then provide power for system;
  • Ensure the Ethernet equipment with power and work properly.

Trouble Shooting

If any trouble in installation, please follow these steps:

  • Please follow the steps if the equipment has trouble.
  • Make sure the equipment is installed according to the manufactures installation guide.
  • Confirm RJ45 cable order meets EIA/TIA568A or 568B standard.
  • Every PoE port can provide PoE equipment maximum power less than 30W, please do not connect the PoE equipment with power over 30W.
  • Replace the equipment with a proper functioning 4 ports PoE Ethernet Switch to check if the equipment is damaged
  • Please contact your vendor if trouble still exists.

 

 

Item
 Description
Downlink Ports 4x10/100Base-TX (PoE)
Uplink Ports 1x 10/100Base-TX
Network Standard IEEE 802.3/802.3u/IEEE802.3x
Switch Capacity 1Gbps
Packet Forwarding Rate 0.74Mpps
Exchange Type Storage&Fowarding
Buffer 768k
MAC Address List 2K
PoE Standard 802.3af/at(PSE)
PoE Mode End-span
PoE Power Supply 1/2(+)，3/6(-)
PoE Output Single PoE Output≤30W(54V DC), Whole machine PoE output≤60W
CCTV Mode 1. Downlink ports only communicate with uplink ports 2.Extend transmission distance to 250m(Downlink Ports) 3.Rate:10Mbps(Downlink Ports)
Surge Immunity 6KV ： IEC61000-4-5
ESD Protection Contact discharge 6K, Air discharge 8KV, Per: IEC61000-4-2
Voltage Input DC 48V~57V
Power Consumption 5W
Operation Temperature -10℃~+55℃
Storage Temperature -40℃~+85℃
Operation Humidity 5%-95%(Non-condensing)
Dimensions(LxWxH) 135mm×85.6mm×27mm
Material Metal
Weight 315g

Write a review

Note: HTML is not translated!
Bad           Good