GE-P8001-UT

GE-P8001-UT

Product Code: GE-P8001-UT
  • iconMajor ports: 1pc 100Mbps uplink Ethernet port, 8 pcs100Mbps downlink Ethernet every port supports MDI/MDIX;
  • iconOne key CCTV mode; 1～8 downlink ports can only communicate with uplink ports; Restrain network storm under 3Mbps;Extend downlink ports transmission distance to 250m;
  • iconPower input: DC48V～57V;
  • iconStandard: Meet IEEE802.3 、IEEE802.3u、IEEE802.3 af/at standards,PoE use End-Span, the spare cable can be of other use;

GE-P8001-UT

GE-P8001-UT 8 ports PoE Switch is a security surveillance Ethernet Switch which aims at Ethernet high definition surveillance and Ethernet project security system. The product fully combines the characteristics of security surveillance, provides fast packet forwarding ability and abundant backplane bandwidth, which ensures clear image and fluent transmission. Inserted static, surge protection circuit can improve product stability. The product supports one key CCTV model, can achieve VLAN, QoS priority after configuration, control the Net storm, protect the information security, prevent the viral transmission and Ethernet attack, fully satisfy the Ethernet video security surveillance system and Ethernet project needs.


Availability: In Stock
GE-P8001-UT
$0.00
Ex Tax: $0.00
Qty: + -
  Add to Wish List Add to Compare

Feature

  • Protection: Excellent anti-thunder, anti-static and anti-interference ability;
  • Appearance: Delicate design and easy installation, configure the anti-theft lock hole, guard against theft;
  • Operation: Plug and Play, No Setting required.

Installation steps

Please check the following items before installation, if it is missing, please contact the dealer

  • 8 ports PoE Ethernet Switch 1pc
  • Power adaptor 1pc
  • AC power cable 1pc
  • Accessory 1set
  • User manual 1set
  • Please follow the below installation steps:
  • Please turn off the signal power and display device power before installation, installation with power will damage the transmission equipment;
  • Use network cable connect PoE IP camera and 1～4 down link ports of product respectively;
  • Use a network cable connect equipment up link port and NVR or computer;
  • Turn on the power of the equipment;
  • Check if the installation is correct, equipment is in good condition, the connection is stable, then provide power for system;
  • Ensure the Ethernet equipment with power and work properly.

Trouble Shooting

If any trouble in installation, please follow these steps:

  • Make sure the equipment is installed according to the manufactures installation guide.
  • Confirm RJ45 cable order meets EIA/TIA568A or 568B standard.
  • Replace the equipment with a proper functioning 4 ports PoE Ethernet Switch to check if the equipment is damaged
  • Please contact your vendor if trouble still exists.

 

 

Item
 Description
Downlink Ports 8x10/100Base-TX (PoE)
Uplink Ports 1x 10/100Base-TX
Network Standard IEEE 802.3/802.3u/IEEE802.3x
Switch Capacity 1.8Gbps
Packet Forwarding Rate 1.34Mpps
Exchange Type Storage&Fowarding
Buffer 768k
MAC Address List 2K
PoE Standard 802.3af/at(PSE)
PoE Mode End-span
PoE Power Supply 1/2(+)，3/6(-)
PoE Output Single PoE Output≤30W(54V DC), Whole machine PoE output≤60W
CCTV Mode 1. Downlink ports only communicate with uplink ports 2.Extend transmission distance to 250m(Downlink Ports) 3.Rate:10Mbps(Downlink Ports)
Surge Immunity 6KV ： IEC61000-4-5
ESD Protection Contact discharge 6K, Air discharge 8KV, Per: IEC61000-4-2
Voltage Input DC 48V~57V
Power Consumption 5W
Operation Temperature -10℃~+55℃
Storage Temperature -40℃~+85℃
Operation Humidity 5%-95%(Non-condensing)
Dimensions(LxWxH) 135mm×85.6mm×27mm
Material Metal
Weight 315g

Write a review

Note: HTML is not translated!
Bad           Good