GE-P2403G-UT

GE-P2403G-UT

Product Code: GE-P2403G-UT
  • iconProvide 24 100Mbps downlink PoE Ethernet ports, 2x gigabit uplink Ethernet ports and 1x gigabit Fiber port;
  • iconDownlink Ethernet ports support PoE+, each port supports max. 30W output;
  • iconSupport power consumption indication( LED indicates power output status); support manage PoE on/off and power consumption setting via Web;
  • iconAccord with IEEE802. 3、IEEE802. 3u、IEEE802. 3ab、IEEE802. 3 af/ at standard;
  • icon4K MAC address,2. 75Mb cache;
  • iconQuick installation, easy operation, convenient for wall-mounted、desktop and rack installations.

GE-P2403G-UT

GE-P2403G-UT The 24 ports PoE switch is an unmanaged PoE Ethernet switch along with 16 * 100Base-TX downlink PoE ports and 2 * 1000Base-TX uplink Ethernet ports featuring 30-watt 802.3at PoE+ as well as 1 additional Gigabit Combo port. The total PoE power budget is up to 270/390 watts. It supports web-based PoE management and real-time PoE output LED display.The device can be widely used in video security monitoring systems, network projects, etc.


Availability: In Stock
GE-P2403G-UT
$0.00
Ex Tax: $0.00
Qty: + -
  Add to Wish List Add to Compare

Installation Requirements

The device should work in indoor environment to avoid thunder stroke. It is important to obey the following requirements no matter you install it in the cabinet or on the workbench directly:

  • Enough space (larger than 10cm) for air outlet so as to facilitate the heating dissipation;
  • Good ventilation system for cabinets and workbench;
  • Cabinet and workbench is sturdy enough to support the injector and it's accessories's weight;
  • Cabinet and workbench have good grounding.
  • The Requirements of Electromagnetic Environment : When it is working, the switch may be affected by external interference outside the system through the ways of radiation and conduction. Please pay attention to the followings:
  • AC power supply is TN system, so it is necessary to use single phase power socket (PE) which can protect ground wire so that the filter circuit can effectively filter out the power grid disturbances;
  • The switch should work far away from high-power radio transmitters, radar transmitters, high-frequency devices;
  • Use electromagnetic shielding if necessary, such as shielded cable;
  • Interface cables should be arranged indoor rather than outdoor to prevent over-voltage and over-current caused from damaging to the signal port.

Trouble Shooting

Please find the following solution when the device doesn’t work

  • Please confirm the installation is correct:
  • Please confirm whether the sequence of RJ45 cable meet the EIA/TIA568A or 568B industry standards;
  • Please replace device which can not work with a properly working one to check whether the device is broken;
  • Please contact the factory if the problem stays unsolved.

 

 

Product Type
Item
 Description
Product Type 24ports
Downlink Ethernet Ports 24×RJ45,PoE+ 10/ 100Base- TX
Port Description Uplink Ethernet Ports 2* 10/ 100/ 1000Base- T+ 1* 1000Base- X( combo)
Power Input 1×AC Female Terminal
Grounding Terminal 1×Grounding Terminal
PoE&Power Power Input Mains on load,100～240VAC 50/ 60Hz
PoE Power Supply End- span(1/ 2，3/ 6),IEEE802. 3 af/ at
PoE Max. Power Output 390W
Single Port Power Output& Voltage Single Port PoE Power Output≤30W, Voltage 54VDC
PoE Web Management PoE Management Via Web( Default IP Address 192. 168. 1. 200) to check, on/off and adjust each port PoE output
Reset Button PoE Web Reset Long- press 3s, all Link LED solid on about 10s, switch reset to factory default; short-press to restart.
One-key CCTV CCTV Mode 1. Downlink ports only communicate with uplink ports; 2. Restrain network storm under 2Mbps
Network Parameters Network Standard IEEE 802. 3, IEEE 802. 3u, IEEE 802. 3 ab
Transmission Distance 100m(Max.)
Exchange Capacity 8.8Gbps
Packet Transfer Rate 5.36Mpps
MAC Address 4K
Packet Data Cache 2. 75Mb
Indicators Status Power Input 1x Red LED
Downlink Ethernet Ports Link:24x Green LED PoE:24x Yellow LED
Uplink Ethernet Port Link 2x Green LED
PoE Power Output Percent 10x LED(Including 7x Green, 2x Yellow, 1x Red), separately indicate 10%、20%～100%
Protection Level ESD 6KV/8KV, Per:IEC61000-4-2
Surge Protection 6KV, Per: IEC61000- 4- 5
Operation Environment Operation Temperature -10℃～45℃
Storage Temperature -40℃～85℃
Humidity( Non- condensing) 0～95%
Mechanics Dimensions(LxWxH) 442mm*285mm*44.5mm
Material Iron
Color Black

Write a review

Note: HTML is not translated!
Bad           Good