GE-P8002FG-SFP-UT

GE-P8002FG-SFP-UT

Product Code: GE-P8002FG-SFP-UT
  • iconMain Function:Provide 8*10/100/1000Base-T Ethernet ports(PoE) , 1* 10/100/1000BASE-T Ethernet ports and 1*gigabit SFP ports;
  • iconCompliance with standards: IEEE802.3 、IEEE802.3u、IEEE802.3ab、IEEE802.3z、 IEEE802.3X、 IEEE802.3af/at;
  • iconPoE Power Supply: With 8x gigabit PoE RJ45 ports, each port supports max. 30W PoE output, whole machine reaches 120W PoE power output;
  • iconOne-key lsolated: Quickly achieve isolation among downlink ports vis dial switch, effectively restrain network storm, improve network feature;
  • iconOperation Environment: Support -10℃~45℃ wide-temperature;
  • iconOperation: Plug&play, convenient to use, support desktop, wall-mounted installations.

GE-P8002FG-SFP-UT

GE-P8002FG-SFP-UT 8 Ports Full Gigabit PoE Ethernet Switch is an unmanaged Ethernet switch designed for Gigabit Ethernet access and PoE applications. It provides eight Gigabit downlink ports, one Gigabit uplink Ethernet port, and one Gigabit optical SFP module slot. The eight downlink ports support 802.3af/at standard and feature Max. 30W PoE power output of single port, Max. 120W of whole machine. The device supports one-key VLAN which isolates the communication between downlink and uplink ports. It can be widely used in security surveillance, hotels, schools, SMB engineering and other occasions


Availability: In Stock
GEP8002FG-SFP-UT
$0.00
Ex Tax: $0.00
Qty: + -
  Add to Wish List Add to Compare

Installation steps

Please check the following items before installation, if it is missing, please contact the dealer

  • Ethernet Switch 1pc
  • Power Adapter 1pc
  • AC power cable 1pc
  • Accessory 1pc
  • User Manual 1pc
  • Please follow the below installation steps:
  • Turn off the power of all the related devices before the installation; otherwise the device would be damaged;
  • Connect PoE cameras with 1~8 downlink ports of product by Ethernet cable;
  • Connect UPLINK port of product with NVR or PC by Ethernet cable;
  • Connect power adapter;
  • Check if the installation is correct, equipment is in good condition, the connection is stable,then power on for system;
  • Ensure the Ethernet equipment with power on can work properly.

Trouble Shooting

If any trouble in installation, please follow these steps:

  • Please follow the steps if the equipment has trouble.
  • Make sure the equipment is installed according to the manufactures installation guide.
  • Confirm RJ45 cable order meets EIA/TIA568A or 568B standard.
  • Every PoE port can provide PoE equipment maximum power less than 30W, please do not connect the PoE equipment with power over 30W.
  • Replace the equipment with a proper functioning 4 ports PoE Ethernet Switch to check if the equipment is damaged
  • Please contact your vendor if trouble still exists.

 

 

Item
 Description
Downlink Ports 8x10/100Base-TX (PoE)
Uplink Ports 1x 10/100/1000Base-TEthernet Ports & 1x 1000Base-X SFP Port
Network Standard Support IEEE 802.3/802.3u/IEEE802.3ab/IEEE802.3z/IEEE802.3x
Switch Capacity 20Gbps
Packet Forwarding Rate 14Mpps
Exchange Type Storage&Fowarding
Buffer 1k
MAC Address List 4K
PoE Standard 802.3af/at(PSE)
PoE Mode End-span
PoE Power Supply 1/2(+)，3/6(-)
PoE Output Single PoE Output≤30W(54V DC), Whole machine PoE output≤120W
CCTV Mode 1. Downlink ports only communicate with uplink ports 2.Extend transmission distance to 250m(Downlink Ports) 3.Rate:10Mbps(Downlink Ports)
Surge Immunity 6KV ： IEC61000-4-5
ESD Protection Contact discharge 6K, Air discharge 8KV, Per: IEC61000-4-2
Voltage Input DC 48V~57V
Power Consumption 5W
Operation Temperature -10℃~+55℃
Storage Temperature -40℃~+85℃
Operation Humidity 5%-95%(Non-condensing)
Dimensions(LxWxH) 200mm×101.8mm×27mm
Material Metal
Weight 500g

Write a review

Note: HTML is not translated!
Bad           Good