GE-LP1603G-UT-20

GE-LP1603G-UT-20

Product Code: GE-LP1603G-UT-20
  • iconProvide 16x 100Mbps downlink PoE Ethernet ports, 2x gigabit uplink Ethernet ports and 1x gigabit Fiber port;
  • iconDownlink Ethernet ports support PoE+, each port supports max. 30W output;
  • iconSupport power consumption indication( LED indicates power output status);
  • iconAccord with IEEE802. 3、IEEE802. 3u、IEEE802. 3ab、IEEE802. 3 af/ at standard;
  • icon4K MAC address,2. 75Mb cache;
  • iconQuick installation, easy operation, convenient for wall-mounted、desktop and rack installations.

 

GE-LP1603G-UT-20

GE-LP1603G-UT-20 The 16 ports PoE switch is an unmanaged PoE Ethernet switch along with 16 * 100Base-TXdownlink PoE ports and 2 * 1000Base-TX uplink Ethernet ports featuring 30-watt 802.3at PoE+ as well as 1 additional Gigabit Combo port. The total PoE power budget is up to 180watts. It supports real-time PoE output LED display.The device can be widely used in videosecurity monitoring systems, network projects, etc.

 


Availability: In Stock
GE-LP1603G-UT-20
$0.00
Ex Tax: $0.00
Qty: + -
  Add to Wish List Add to Compare

Installation steps

Please check the following items before installation, if it is missing, please contact the dealer.

  • 16 Ports PoE Switch 1pcs
  • AC Power Cable 1pcs
  • Accessories 1pcs
  • User Manual 1pcs
  • Please follow installation s teps as below:
  • Turn off the power of all the related devices before the installation; otherwise the device would be damaged;
  • Use Ethernet cable connect PoE IP camera and 1~16 downlink ports of product respectively;
  • Use an Ethernet cable to connect equipment uplink port with NVR or computer;
  • Connect power adapter;
  • Check if the installation is correct, equipment is in good condition, the connection is stable, then power on for system.

Trouble Shooting

If any trouble in installation, please follow these steps:

  • Please make sure you have followed the instruction to install the device;
  • Please confirm if the RJ45 cable order is in accordance with the EIA/TIA568A or 568B industry standards;
  • The power supply of each PoE port is no more than 30W; please do not connect the PoE device which exceeds the maximum PoE power supply;
  • Please replace a failure device with a proper one to check if the device is broken.